World-Map
 

Testing of Electr. Installations

Overview: Standards, Devices under Test, Testers
Testing per IEC 60364.6, EN 50110, DIN VDE 0100-600, 0105-100  
Testing of Photovoltaic Systems (PV Solar Technology)  
Accessories for Installation Testers  
Testing of Voltage, Phasing, Continuity, Polarity and Phase Sequence  
Software for Installation Testers  
Testing of Car Charging Stations per IEC 61851  
FAQ - Electrical Testing
Which Tester for Which Standard?

Testing of safety measures in electrical systems is intended to protect people from accidents with electrical power, and thus to ensure their freedom from bodily harm. Property damage caused by electrical power should of course be prevented as well.

Testers for Installations And thus every electrical system should be checked with our test instruments before initial start-up, and at regular intervals thereafter, in order to assure the effectiveness of existing protective measures.
 

IEC 60364 , EN 50110
VDE 0100, VDE 0105
Photovoltaics
PV Solar Technology
Car Charging Stations
IEC 61851
PROFiTEST MXTRA PROFITEST PVsun memo PRO-TYP II
PROFiTEST ...
METRALINE ...
PROFiTEST PV PRO-TYP
 
Voltage, Phasing, Sequence
Continuity, Polarity
Accessories for
Installation Testers
Software for
Installation Testers
  Voltage Testers Accessories Software
METRAVOLT ... Adapters, Plugs, e.g. ETC, epINSTROM, ...

» Which tester do I use for which standard?
 
» Special items, About electr. Testings, FAQs

With the help of our innovative products, all relevant measured quantities can be acquired which are decisive for system safety.