World-Map
 

CP1100

AC/DC Current Sensor Clamp with Voltage Output for Multimeters, 1000A, 32mm Ø

The CP30/330 and CP1100/1800 AC / DC current probes have been designed for reliable and accurate, contactless measurement of AC, DC and complex waveform currents.

Using advanced Hall Effect technology they can measure currents accurately.

  • AC and DC current measurement for TRMS multimeters
  • High accuracy of 1%
  • 100 mA / 500 mA resolution
  • Auto Power Off for saving batteries
  • High bandwith DC.. 20 kHz
  • The transformation ratio can be set directly in the METRAHIT multimeters
  • Simple autozeroing via push button
     
Type   CP30 CP330 CP1100 CP1800
Measuring range 0 ... 30 A (1) 0 ...30 / 300 A 0...100 / 1000 A 0...125 / 1800 A
Resolution 1 mA 50 mA/ 100mA 100 mA/ 500mA 100 mA/ 500mA
Overload capacity 500 A (60s) 600 A (60s) 2000 A (60s) 2000 A (60s)
Temperature coefficient  /°C ±0,01% of rdg. ±0,1 % of rdg. ±0,1 % of rdg. ±0,1 % of rdg.
Transformation ratio 100 mV/A 10 mV/A,1mV/A 10 mV/A,1mV/A 10 mV/A,1mV/A
Overall DC accuracy ±1% of rdg.
±2mA
±1% of rdg.
±50/100 mA
±1% of rdg.
±100/500 mA
±1% of rdg.
±100/500 mA
Frequency range DC... 20 kHz
(-1 dB)
DC... 20 kHz
(-3 dB)
DC... 20 kHz
(-1 dB)
DC... 20 kHz
(-1 dB)
Clamp opening 25 mm 25 mm 32 mm 32 mm
Artikelnummer Z201B Z202B Z203B Z204A

 
1)  DC or ACpk
Operating voltage 300 V ACRMS or DC
rdg. = reading of measuring value

 

 

  Article No: Z203B
Icon Technical Data » GB (pdf 161 kB)
Icon Operating Instructions » (D GB) (pdf 679 kB)
Products using CP1100 as an accessory (display)