Quality, Standards, Certificates
and IQNet Certificates for our
Quality Management System per DIN EN ISO 9001
Environtmental Management System per DIN EN ISO 14001
Recycling Certificate and Climate Protection Certificate
The requirements of the packaging regulation are fulfilled.
By recycling these crowds approx. 17 000 kg of CO2 were saved.
|Accreditation per DIN EN ISO / IEC 17025
and federally recognized as
DAkkS Calibration Laboratory under
Visit our DAkkS Calibration Center
<- List of our accredited measuring quantities
DAkkS Calibration Certificate
provided as standard feature with
and for many of our testers.
|Federally recognized Calibration Center for energy meters
Visit our Calibration Center -> here.
DKE, VDI / VDE,
ZVEI, DKD / PTB
|We incorporate our know-how into
national and international safety standards by
means of active participation in the development of normative documents
|CE, GS, UL,
EX - ATEX Certificate
GL (German Lloyd)
VDE (D), SEV (CH)
IMQ (Italy), MEEI (HU)
|Many of our instruments have been
distinguished with several
safety relevant awards
|Therefore we are partner of E-CHECK.
Needles to say, our test instruments comply with the requirements for performing the E-CHECK - for safe electrical systems and devices.
|The Recognised Component Mark from UL (left) may be used for components parts that are part of a larger product or system. Many of our custom power supplies have this certification.|
| Innovation by cooperation
- with partners of control and automatiion engineering
- possible by membership in Automation Valley.
|We are member of
PROFIBUS User Organization
|LonWorks-technology refers to a universal automation network and is a worldwide standard for the automation of buildings and industrial plants. Our energy management systems and measuring transducers are equipped with this interface.|
|For the development of M-Bus applications we consider the requirements of
the M-Bus User Group at Paderborn University.
L-Bus devices work with the same protocols as M-Bus devices, but with very low signal levels.
|HART - Highway Addressable Remote Transducer - is an open communication protocol for industrial measuring instruments - many of our transducers can work with this protocol.|
|The Controller Area Network is used in the automotive industry, the factory automation and for machine control. We support this with our temperature controllers.|
|MODBUS Protocol is a messaging structure developed by Modicon in 1979, used to establish master-slave/client-server communication between intelligent devices. It is a de facto standard, truly open and the most widely used network protocol in the industrial manufacturing environment. Our energy management systems and transducers are also available with this protocol.|