RFID Reader / Writer (13.56 MHz) for Test Instruments with RS 232 Port
The RFID identification system is used to mark and identify tools and equipment.
ID numbers can be written to RFID tags via a PC with the SCANBASE RFID or .SCANBASE RW.
SCANBASE RW devices read out the code and forward it to our test instruments, in order to be able to allocate measured values and test results to the device under test in an unequivocal fashion.
(1) In order to program the tags, the Z751G must be connected to the RS232 port at a PC. A special RS232 cable with a power pack are required to this end, which can be purchased upon request.