with RS232 and USB interface   

SECUTEST Instrument Options:

Test results ascertained with the test instruments are transmitted directly to the SI+ module via the test instrument’s RS 232 port. Test results can be saved on-site in the form of clear-cut, reliably documented measurement and test reports with date and time.

Stored data can be transferred from the SI+ module to a PC via the RS 232 or USB port at a later point in time entirely independent of the test instrument. These data can then be further processed with appropriate software (...more).

A barcode scanner or an RFID reader (accessories) can be connected to the RS 232 port at the SI+ module. Information available in the form of barcodes or RFID tags can thus be quickly, easily and reliably entered to test reports. This type of data entry allows for time-saving, inexpensive acquisition of large quantities of information, for example during series measurements conducted for devices which are labeled with barcodes or furnished with RFID tags (...more).

With PROFITEST 204 and METRISO 5000D-PI:

In these cases, the SI+ module serves strictly as an on-site input device for additional information regarding the system, the device under test, the customer or repairs.

	Article No: M702G
	Technical Data » GB (pdf 85 kB)
	Operating Instructions » GB (pdf 213 kB)
	Products using SECUTEST SI+ as an accessory (display)
	Software Driver Control
	Accessories (display)