 |
Temperature controller for machines and systems with central control
and display concepts. Connection to central controls via various fieldbus interfaces or
integrated service interface.
Applications include plastic processing machines, semiconductor
manufacturing processes, oven manufacturing, textile machinery, climate and environmental
technology, packaging machines, food processing and process engineering.
Software
R6KONFIG - With this tool the R6000 can be totally configured and parameterized.
The standard version includes the following functions:
- New: PDPI - Algorithm for Induction Heating
Systems - see pdf below
- New: pH-Value Control - see pdf below
- Virtual analog outputs
- Ratio control
- Billing of several measuring inputs to
determine the controlled variable
- Cycle time: 10 ms per channel
- Overshoot-free PDPI controller, limit transducer, cyclic duration controller
- Freely configurable control channels
- Control parameter adaption can be started at any time
- 2-step, 3-step controller, continuous action, step-action and split-range controller
- Fixed value, cascade, differential and switch controller
- Data logger, 3600 sampling values
each from setpoint and actual value for 8 channels
- Alarm history
records up to 100 error states with timestamp
- Cost Reduction for Energy via Intelligent Power Limitation -> more
- Hot-runner control with actuating circuit and booster circuit
- Water cooling control (non-linear cooling effect with evaporation)
- Actual value management by groups for the avoidance of thermal stressing
- Remote cold junction - only with original cold junction Z306A possible
- 2nd set of parameters
- Setpoint ramp
- Feed-forward control for the avoidance of undershooting and overshooting
- Control zones can be assigned to groups
- All zones can be deactivated as desired with internal or external signal
- Absolute or relative limit value monitoring, start-up inhibiting, normally open /
normally closed contact
- 8 sensor inputs, thermocouples or Pt100, individually selectable with software
- Monitoring for sensor breakage, cable interruption, polarity reversal and
short-circuiting
- Regulated temperature becomes active in the event of sensor breakage
- Resistant to interference caused by leakage current at thermocouples
- 16 binary inputs / outputs with short-circuit detection and self-restoring overload
protection
- Heating circuit monitoring without additional transformer
- Voltage compensated heating current monitoring with external standard transformer
- Remote diagnosis with numerous monitoring functions
- Mapping - checks sensor-heater assignment
- RS 232 service interface for configuration and data exchange with free software
- 24 V DC power supply
 3 Years Warranty- Made in Germany
Options:
- 4 binary inputs / outputs or 4 continuous outputs
- Profibus-DP, CAN-CANOpen, RS485-MODBUS, RS485-EN 60870
|
We at facebook
