METRAHit 29S

discontinued - successor: METRAHIT ENERGY

5¾ place, precision, digital TRMS multimeter, power meter and power disturbance measuring instrument, CAT.IV

Precision multimeter, power meter and power disturbance measuring instrument with integrated memory for universal use in the field of energy electronics, and for high bandwidth electronics applications from 16 Hz to 100 kHz, TRMS _ACand TRMS _AC+DC

Rugged digital multimeter, ± 310,000 digits,
With triple display
Automatic blocking system (ABS)
IR interface, V_DC, V_AC/DC, V_AC, mA_DC, mA_AC/DC, to max. 10 A_AC/DC, Ohm, °C (Pt100/Pt1000, type J and K thermocouples), W, VA, Var, Wh, Vah, peak load profile, power disturbance measurements, power disturbance recording
Continuity and diode testing
MIN-MAX measurement value storage, DATA hold
Minimal inherent deviation± (0.02% + 10 digits for V_DC )
With cable set, protective rubber cover and DKD calibration certificate
CSA certification
DKD calibration certificate
CAT.IV @ 300 V or CAT.III @ 600 V per IEC 61010-1

	Article No: M229A M229E
	Technical Data » GB » F » PL (pdf 244 kB)
	Operating Instructions » GB » F » I » E » NL » SF » S » PL (pdf 1272 kB)
	New Fuse in METRAHIT 28S, 29S (pdf 23 kB)
	Short-Form Operating Instructions (pdf 154 kB)
	Per safety standard IEC 61010-1 since 1/2004 (pdf 48 kB)
	Pattern Approval for China (pdf 288 kB)
	Power Disturbance Recording with METRAwin10 - Configuration files (zip 8 kB)
	DKD Calibration Certificate provided as standard feature with METRAHit Series 20 (pdf 485 kB)
	Multimeters as Power, Transient and Energy Recorders (pdf 82 kB)
	Power Disturbance Recording METRAHit29S - Show (pdf 526 kB)
	Power Disturbance Recording with METRAHit29S and METRAwin10 (txt 2 kB)
	Software METRAwin10/METRAHit
	Accessories (display)

1.	WZ11A	Current Transformer Clamp, 1...200A_AC, 1mA/A, 1..3%
2.	WZ11B	Current Sensor Clamp, 0.5 ..20 / ..200A_AC, adjustable
3.	Z3512A	Current Sensor Clamp 1/10/100/1000 A_AC, selectable
4.	WZ12A	Current Transformer Clamp with Cable, 15...180A_AC, 1mA/A, ±3%
5.	WZ12B	Current Sensor Clamp, 10mA ... 100A_AC, 100mV/A, ±2%
6.	WZ12C	Current Sensor Clamp, 1mA ..15A / ..150A_AC, adjustable
7.	WZ12D	Current Transformer Clamp, 30mA ... 150A_AC, 1000:1, 1mA/A, ±2,5%
8.	WZ12E	Current Sensor Clamp, 0.2A ... 150A_AC, 10mV/A, ±2%
9.	WZ12F	Current Sensor Clamp, 20mA ... 15A_AC, 100mV/A, ±2%
10.	Z3511	Current Transformer Clamp, 4 ... 500 A_AC, 1 mA/A, 3%
11.	Z3512	Current Transformer Clamp, 0.5 ... 1000 A_AC, 1 mA/A, 0.5 ... 0.7%
12.	Z3514	Current Transformer Clamp, 1.. 2000A_AC, 1mA/A, 0,5%+0,1A
13.	Z13B	Current Transformer Clamp 0,5-60/600A_DC; 0,2-40/400A_AC, 10mV/A; 1mV/A, 1,5%; 2%, 50mm Ø
14.	Z3431-2	High Frequency Probe, 100kHz - 750MHz, 0.25..50V AC
15.	TF220	Pt 1000 Immersion Probe for Measurements in Gas and Liquid
16.	TF550	Pt 100 Immersion Probe for Measurements from -50°... +550°C
17.	TF400CAR	Pt 1000 dipstick oil temperature sensor for motor oil temperature measurement in automotive applications
18.	TS-Chipset	Pt 100 Temperature Sensors, adhesive, -50°.. +550°C
19.	Z3409	Pt 100 Sensor for Surface and Immersion Measurements
20.	Z3431-3	Temperature Probe with Immersion Sensor, NiCr-Ni, -20.. +350°C
21.	Z3431-9	Temperature Probe without Sensor, NiCr-Ni, -20.. +350°C
22.	Z3431-4	Temperature Probe without Sensor, NiCr-Ni, -25.. +1150°C
23.	SM16	Current Measuring Adapter
24.	PMA16	Power Measuring Adapter for Multimeter METRAHIT 29S, Energy
25.	EMA1	Energy Measuring Adapter for Ferraris Meters
26.	KS17-ONE	Cable Set, max. 16 A, 600 V / CAT III, Length 1.30 m
27.	KS17S	Cable set with 2 mm Ø steel tips and 120 cm cable, 1000 V / CAT II
28.	KS17-2	Cable Set, max. 16 A, 1000 V / CAT III, Length 1.30 m
29.	KY94	Hook Clips (1 Pair) for KS17-2
30.	KY95-1	Alligator Clips (1 Pair) for KS17-ONE
31.	USB-Hit	USB Interface Adapter for METRAHit 2xx, 30x Multimeters
32.	USB-PACK	Set of USB Interface Adapter and METRAwin for Multimeters 2xx, 30x
33.	Z3241	Interface cable RS232 for connecting PC - measuring instrument
34.	BD232	Interface Adapter for METRAHit Multimeters - IR/RS232
35.	BD-Pack 1	Single-Channel Recording System for Multimeters with Integrated Memory: METRAHit 22M, 26M, 29S, 30M and 29C
36.	SI232-II	discontinued - Memory adapter
37.	F829	Carrying Pouch for METRAHit
38.	F836	Ever-ready Case for METRAHit with Cable Compartment
39.	F840	Ever-ready Case for 2 METRAHit, 2 Adapters + Accessories
40.	HC20	Hard Case for 1 METRAHit and Accessories
41.	HC30	Hard Case for 2 METRAHit and Accessories
42.	GH18	Protective Rubber Cover and Carrying Strap for METRAHit
43.	HitBag	Cordura Belt Pouch for METRAHIT and METRAport
44.	NA HIT 2x	Power adapter 90 ... 250 V_AC / 5 V_DC for METRAHIT 2x
45.	Fuses	Fuses for Multimeters
46.	METRAFLEX 3000	Flexible Current Sensor 30/300/3000 A, Loop length 610mm
47.	TF400SURFACE	Surface Temperature Sensor, Type K Thermocouple

METRAHit 29S

discontinued - successor: METRAHIT ENERGY

5¾ place, precision, digital TRMS multimeter, power meter and power disturbance measuring instrument, CAT.IV

Accessories (hide)

Catalogs T&M and Industry

Fairs and Product Shows

My Measuring Task

Video Streams

FAQs - FAQs - FAQs

Product Index