 |
These devices convert the measured quantity (i.e. direct current or voltage,
or the signal from a thermocouple, a resistance thermometer, a remote sensor or
a potentiometer) into a proportional analog output quantity.
see also:
- Measured quantity (temperature, resistance change, DC quantities) and all
measuring ranges can be programmed with a PC.
- Output quantity range can also be programmed with a PC, and the type of
output quantity (current or voltage signal) can be selected with a DIP
switch.
- Electrical isolation between measured quantity, analog output quantity and
auxiliary power /in compliance with EN 61 010
- Digital measured value information available at the programming interface:
facilitates initial start-up, measured values can be displayed at the
programming PC
- Serial interface
- Housing:
SINEAX: S17 housing for top-hat rail or wall mounting
EURAX: plug-in module for 19" rack
SIRAX: B17 housing for plug-in installation to BP902 rack
| Article No. |
Variant |
Meas.Output |
Auxiliary Power |
| SIRAX |
No cold junction compensation |
| 998809 |
Standard |
0 ... 20 mA
programmable between
0.. 5 or 0.. 22mA
± 2,5 and ±20mA |
24..60VAC/DC |
| 107913 |
85..230VAC/DC |
| 107921 |
[EEx ia] IIC intrinsically safe measuring circuit |
24.. 60VAC/DC |
| 107939 |
85..110VDC/
85..230VAC |
Order other variants with complete order code 6xx-... in accordance
with the data sheet. See data sheet for default configuration.
|
