 |
In addition to the features of the A210 / A220 this power monitoring device
provides functions for system and load analysis. The system and load analysis is
done by measurement of harmonics, THD, asymmetry, comprehensive average and
max./min. values.
- off identical design to SINEAX A230, exept for dimensions
- see also
SINEAX A230: 
144 x 144 x 46 mm
The A230s is designed for application in high, medium and low voltage systems.
Any current and voltage transformers are taken into account in the calculation
of the measured values.
- Accurate measured values:
U, I: 0.2% P, Q, S, PF, meter: 0.5%
F: 0,02 Hz
- 4-quadrant measurement of all values in AC systems
- Clip-on extension module with average value and load profile recording,
RS-232/485 interface, MODBUS, synchronizing input, switchover of high/low
tariffs
- Safe 3-way galvanic isolation between all circuits
- 2 outputs for pulse or limit values
- 4 meters for active power: Incoming/outgoing with high/low tariff*
- 4 meters for reactive power:
Inductive/capacitive or incoming/outgoing with high/low tariff*
- All counter values, recorded values, and settings are kept on a power
supply failure
- System/application: Single-phase 3L balanced/unbalanced (Aron, Full), 4L
balanced/unbalanced (Open-Y, Full)
-
Dimensions 96 x 96 x 46 mm
- 4-digit, 14 mm high LED display
|
