METRAHIT TECH

TRMS Technological Multimeter with ±12,000 Digits

TRMS digital multimeter for industrial use, e.g. process engineering for chemicals

Common features of the A series:

Resolution: ± 12,000 digits, 4½-place
3 connector jacks with patented automatic blocking sockets (ABS)
TRMS AC and AC / DC function
Voltage measurement with a basic accuracy of ±0.05% (V DC)
Automatic and manual measuring range selection
Automatic storage of measured values: DATA / MIN / MAX
Large, light-blue illuminated display with extra-large characters (15 mm) and an analog bar graph for dynamic processes
Separate battery and fuse compartments
IP 52 protection against dust and water
Measuring categories: 1000 V CAT III and 600 V CAT IV
Made in Germany
DAkkS calibration certificate included

Specific features of the TECH multimeter:

20 multimeter functions
Additional filter function and voltage measurement with reduced input impedance for limiting interference, e.g. for measurements at frequency converters
Additionally adjustable transformation ratio for connecting current sensors and transformers with voltage or current output
Temperature measurement with type K thermocouples
Capacitance – continuity testing – diode testing – resistance

METRAHIT	BASE	PRO	TECH	X-TRA
Order number	M241A	M242A	M243A	M240A
Number of multimeter functions	12	16	20	23
Bandwidth (TRMS)	1 kHz	10 kHz	10 kHz	20 kHz
Frequency measurement	100 kHz	100 kHz	100 kHz	1 MHz
Current measurement	Clamp	x	x	x
Low-pass filter (1 kHz)		x	x	x
Capacitance measurement			x	x
IR interface				x
Data memory (4 MBit = 512 kB)				x
Mains connection				x
Rubber holster	Optional	Optional	Optional	x

	Article No: M243A
	Technical Data » GB » F » I » E (pdf 345 kB)
	Operating Instructions » GB » F » I » E » NL » S » PL (pdf 1095 kB)
	Short-form Operating Instructions » D-GB » S-GB
	Pamphlet » GB » PL » RU (pdf 901 kB)
	Accessories (display)

1.	Z3431-3	Temperature Probe with Immersion Sensor, NiCr-Ni, -20.. +350°C
2.	Z3431-9	Temperature Probe without Sensor, NiCr-Ni, -20.. +350°C
3.	Z3431-4	Temperature Probe without Sensor, NiCr-Ni, -25.. +1150°C
4.	F836	Ever-ready Case for METRAHit with Cable Compartment
5.	HitBag	Cordura Belt Pouch for METRAHIT and METRAport
6.	F829	Carrying Pouch for METRAHit
7.	F840	Ever-ready Case for 2 METRAHit, 2 Adapters + Accessories
8.	HC20	Hard Case for 1 METRAHit and Accessories
9.	HC30	Hard Case for 2 METRAHit and Accessories
10.	Fuses	Fuses for Multimeters
11.	Z13B	Current Transformer Clamp 0,5-60/600A_DC; 0,2-40/400A_AC, 10mV/A; 1mV/A, 1,5%; 2%, 50mm Ø
12.	WZ11B	Current Sensor Clamp, 0.5 ..20 / ..200A_AC, adjustable
13.	WZ12B	Current Sensor Clamp, 10mA ... 100A_AC, 100mV/A, ±2%
14.	WZ12C	Current Sensor Clamp, 1mA ..15A / ..150A_AC, adjustable
15.	Z3512A	Current Sensor Clamp 1/10/100/1000 A_AC, selectable
16.	WZ12A	Current Transformer Clamp with Cable, 15...180A_AC, 1mA/A, ±3%
17.	WZ12D	Current Transformer Clamp, 30mA ... 150A_AC, 1000:1, 1mA/A, ±2,5%
18.	WZ11A	Current Transformer Clamp, 1...200A_AC, 1mA/A, 1..3%
19.	Z3511	Current Transformer Clamp, 4 ... 500 A_AC, 1 mA/A, 3%
20.	Z3512	Current Transformer Clamp, 0.5 ... 1000 A_AC, 1 mA/A, 0.5 ... 0.7%
21.	Z3514	Current Transformer Clamp, 1.. 2000A_AC, 1mA/A, 0,5%+0,1A
22.	GH X-TRA	Protective Rubber Cover and Carrying Strap for METRAHIT BASE, PRO, X-TRA
23.	SM16	Current Measuring Adapter
24.	KS17-2	Cable Set, max. 16 A, 1000 V / CAT III, Length 1.30 m
25.	KS17S	Cable set with 2 mm Ø steel tips and 120 cm cable, 1000 V / CAT II
26.	KY94	Hook Clips (1 Pair) for KS17-2
27.	KY95-1	Alligator Clips (1 Pair) for KS17-ONE
28.	Z206D	Quick Charger for NiMH Batteries
29.	Z206E	Rechargeable batteries for potentially explosive atmospheres
30.	KY95-3	Alligator Clips (1 Pair) for KS17-2
31.	KS-NTS	Cable Set with Different Test Probes, max. 20 A, 1000 V CAT III
32.	METRAFLEX 3000	Flexible Current Sensor 30/300/3000 A, Loop length 610mm
33.	TF400SURFACE	Surface Temperature Sensor, Type K Thermocouple
34.	CP30	AC/DC Current Sensor Clamp with Voltage Output for Multimeters, 30A, 25mm Ø
35.	CP330	AC/DC Current Sensor Clamp with Voltage Output for Multimeters, 300A, 25mm Ø
36.	CP1100	AC/DC Current Sensor Clamp with Voltage Output for Multimeters, 1000A, 32mm Ø
37.	HIT CLIP	Magnetic Holder and Belt Strap for METRAHIT Multimeters with Rubber Holster (new)
38.	Z502U	Magnetic Measuring Tips with Contact Protection - Set with Magnetic Holder (new)
39.	METRAFLEX 300M	Flexible Current Sensor 3/30/300 A, 1000-10mV/A, Loop length 160mm (new)
40.	KS-AP	Cable Set with Adjustable Test Probes, 1000 V / CAT II or CAT IV (new)

METRAHIT TECH

TRMS Technological Multimeter with ±12,000 Digits

Accessories (hide)

Catalogs T&M and Industry

Fairs and Product Shows

My Measuring Task

Video Streams

FAQs - FAQs - FAQs

Product Index