METRAHIT EBASE

4 6/7 Place High-End TRMS Digital Multimeter, System Compatible with IR Interface, Resolution: 60,000 Counts - 15 Multimeter Functions

Infrared interface for data exchange and parameters configuration with a PC (optional: IR-USB adapter and METRAwin10 software)
TRMS AC and AC+DC voltage measurement, bandwidths of up to 20 kHz
dB measuring function
Adjustable clamp factor for measurement using current sensor with voltage output

... Plus additional functions as included with the METRAHIT BASE

Scope of delivery:
• Multimeter set with HC20 hard case
• KS17-2 measurement cable set
• Rubber holster
• Two 1.5 V AA batteries
• Condensed operating instructions
• CD ROM with data sheet and operating instructions (German and English)
• DKD calibration certificate

	Article No: M251A
	Technical Data » GB » F (pdf 298 kB)
	Operating Instructions » GB » F » NL (pdf 868 kB)
	Pamphlet » GB » PL » RU (pdf 647 kB)
	Software METRAwin10/METRAHit
	Accessories (display)

1.	USB X-TRA	Interface Adapter Infrared to USB for METRAHit E, S Series, X-TRA
2.	NW3A	Shunt resistor 3A, 0.1 Ω class 0,5 600V CAT.IV, 100mV/A
3.	NW300mA	Shunt resistor 300mA, 0.1Ω, class 0,5; 1mV/mA
4.	Z13B	Current Transformer Clamp 0,5-60/600A_DC; 0,2-40/400A_AC, 10mV/A; 1mV/A, 1,5%; 2%, 50mm Ø
5.	WZ11B	Current Sensor Clamp, 0.5 ..20 / ..200A_AC, adjustable
6.	WZ12B	Current Sensor Clamp, 10mA ... 100A_AC, 100mV/A, ±2%
7.	WZ12C	Current Sensor Clamp, 1mA ..15A / ..150A_AC, adjustable
8.	Z3512A	Current Sensor Clamp 1/10/100/1000 A_AC, selectable
9.	AF101A	Flexible Current Sensor 0,5..1000/10kA:1V, 1-0,1mV/A, Loop Length 1200mm, 1%V_Ausg.+2mV
10.	GH X-TRA	Protective Rubber Cover and Carrying Strap for METRAHIT BASE, PRO, X-TRA
11.	HitBag	Cordura Belt Pouch for METRAHIT and METRAport
12.	F829	Carrying Pouch for METRAHit
13.	F836	Ever-ready Case for METRAHit with Cable Compartment
14.	F840	Ever-ready Case for 2 METRAHit, 2 Adapters + Accessories
15.	HC20	Hard Case for 1 METRAHit and Accessories
16.	HC30	Hard Case for 2 METRAHit and Accessories
17.	KS17S	Cable set with 2 mm Ø steel tips and 120 cm cable, 1000 V / CAT II
18.	KS17-2	Cable Set, max. 16 A, 1000 V / CAT III, Length 1.30 m
19.	KY95-2	Alligator Clips (1 Pair) for KS17-2
20.	KY95-1	Alligator Clips (1 Pair) for KS17-ONE
21.	KY96	Plug-On Lugs (1 Pair) for KS17-2
22.	KS-NTS	Cable Set with Different Test Probes, max. 20 A, 1000 V CAT III
23.	METRAFLEX 3000	Flexible Current Sensor 30/300/3000 A, Loop length 610mm
24.	TF400SURFACE	Surface Temperature Sensor, Type K Thermocouple
25.	METRAFLEX P300	Flexible Current Sensor 3/30/300 A, 1V-10mV/A, Loop length 450 mm
26.	CP30	AC/DC Current Sensor Clamp with Voltage Output for Multimeters, 30A, 25mm Ø (new)
27.	CP330	AC/DC Current Sensor Clamp with Voltage Output for Multimeters, 300A, 25mm Ø (new)
28.	CP1100	AC/DC Current Sensor Clamp with Voltage Output for Multimeters, 1000A, 32mm Ø (new)
29.	METRAFLEX 3000M	Flexible Current Sensor 30/300/3000 A, 100-1mV/A, Loop length 160mm (new)
30.	Z3431-3	Temperature Probe with Immersion Sensor, NiCr-Ni, -20.. +350°C
31.	Z3431-4	Temperature Probe without Sensor, NiCr-Ni, -25.. +1150°C
32.	Z3431-9	Temperature Probe without Sensor, NiCr-Ni, -20.. +350°C
33.	HIT CLIP	Magnetic Holder and Belt Strap for METRAHIT Multimeters with Rubber Holster (new)
34.	METRAFLEX 3001	Flexible Current Sensor 30/300/3000 A, 100-1mV/A, Loop length 610mm

METRAHIT EBASE

4 6/7 Place High-End TRMS Digital Multimeter, System Compatible with IR Interface, Resolution: 60,000 Counts - 15 Multimeter Functions

Accessories (hide)