METRAHit 22S

discontinued - successor: METRAHIT BASE, EBASE

4¾ place, precision multimeter and temperature measuring instrument, CAT.IV

Display range: +/- 30,000 digits
Inherent deviation: 0.05% of reading + 3 digits
Measuring functions: 300.00 mV - 1000.0 V, 300.00 Ohm - 30.000 MOhm, 3.000 nF - 30.000 mF, dBV, Hz, °C/°F,
Stopwatch, 10 ms - 100 min.
mA - A_AC via additional WZ12C current sensor with mV output
MIN-MAX measurement value storage, DATA hold
Continuity and diode testing
Frequency and pulse generator, 1 Hz to 1 kHz
Automatic range selection and battery cutoff
Patented, automatic blocking system (ABS)
IR data interface
Integrated quartz movement
CSA certification
DKD calibration certificate
CAT.IV @ 600 V or CAT.III @ 1000 V per IEC 61010-1

	Article No: M222A M222F
	Technical Data » GB » F (pdf 284 kB)
	Operating Instructions » GB » F » I » E » NL » S » PL » N (pdf 594 kB)
	Per safety standard IEC 61010-1 since 1/2004 (pdf 48 kB)
	Software METRAwin10/METRAHit
	Accessories (display)

1.	WZ11B	Current Sensor Clamp, 0.5 ..20 / ..200A_AC, adjustable
2.	WZ12B	Current Sensor Clamp, 10mA ... 100A_AC, 100mV/A, ±2%
3.	WZ12C	Current Sensor Clamp, 1mA ..15A / ..150A_AC, adjustable
4.	Z3512A	Current Sensor Clamp 1/10/100/1000 A_AC, selectable
5.	Z13B	Current Transformer Clamp 0,5-60/600A_DC; 0,2-40/400A_AC, 10mV/A; 1mV/A, 1,5%; 2%, 50mm Ø
6.	Z3431-2	High Frequency Probe, 100kHz - 750MHz, 0.25..50V AC
7.	TF220	Pt 1000 Immersion Probe for Measurements in Gas and Liquid
8.	TF550	Pt 100 Immersion Probe for Measurements from -50°... +550°C
9.	TF400CAR	Pt 1000 dipstick oil temperature sensor for motor oil temperature measurement in automotive applications
10.	Z3409	Pt 100 Sensor for Surface and Immersion Measurements
11.	TS-Chipset	Pt 100 Temperature Sensors, adhesive, -50°.. +550°C
12.	Z3431-3	Temperature Probe with Immersion Sensor, NiCr-Ni, -20.. +350°C
13.	Z3431-9	Temperature Probe without Sensor, NiCr-Ni, -20.. +350°C
14.	Z3431-4	Temperature Probe without Sensor, NiCr-Ni, -25.. +1150°C
15.	USB-Hit	USB Interface Adapter for METRAHit 2xx, 30x Multimeters
16.	USB-PACK	Set of USB Interface Adapter and METRAwin for Multimeters 2xx, 30x
17.	BD232	Interface Adapter for METRAHit Multimeters - IR/RS232
18.	BD-Pack 1	Single-Channel Recording System for Multimeters with Integrated Memory: METRAHit 22M, 26M, 29S, 30M and 29C
19.	SI232-II	discontinued - Memory adapter
20.	Z3241	Interface cable RS232 for connecting PC - measuring instrument
21.	KS17-ONE	Cable Set, max. 16 A, 600 V / CAT III, Length 1.30 m
22.	KS17S	Cable set with 2 mm Ø steel tips and 120 cm cable, 1000 V / CAT II
23.	KS17-2	Cable Set, max. 16 A, 1000 V / CAT III, Length 1.30 m
24.	KY94	Hook Clips (1 Pair) for KS17-2
25.	KY95-1	Alligator Clips (1 Pair) for KS17-ONE
26.	F829	Carrying Pouch for METRAHit
27.	F836	Ever-ready Case for METRAHit with Cable Compartment
28.	F840	Ever-ready Case for 2 METRAHit, 2 Adapters + Accessories
29.	HC20	Hard Case for 1 METRAHit and Accessories
30.	HC30	Hard Case for 2 METRAHit and Accessories
31.	GH18	Protective Rubber Cover and Carrying Strap for METRAHit
32.	HitBag	Cordura Belt Pouch for METRAHIT and METRAport
33.	NW3A	Shunt resistor 3A, 0.1 Ω class 0,5 600V CAT.IV, 100mV/A
34.	NW300mA	Shunt resistor 300mA, 0.1Ω, class 0,5; 1mV/mA
35.	METRAFLEX 3000	Flexible Current Sensor 30/300/3000 A, Loop length 610mm

METRAHit 22S

discontinued - successor: METRAHIT BASE, EBASE

4¾ place, precision multimeter and temperature measuring instrument, CAT.IV

Accessories (hide)

Catalogs T&M and Industry

Fairs and Product Shows

My Measuring Task

Video Streams

FAQs - FAQs - FAQs

Product Index