 |
Cable Multimeter for Measurements in Symmetrical Copper Cable Networks
The METRAHit 16U cable multimeter is a rugged portable measuring instrument
for use in the field. It is used to perform measurements for pinpointing errors
in copper cable networks. Interruption of a single core, or contact with an
open-circuit core (capacitive asymmetry), can be recognized by switching
polarity with the high speed logarithmic bar graph display.
- Insulation resistance measurement (100 V test voltage) and simultaneous
recognition of interference voltage, as well as polarity reversal for diode
testing
- Cable symmetry testing by means of rapid changeover switching
- Multifunctional multimeter (V, Ohm, F, Hz)
- AC and AC+DC TRMS measurement
- Scaled current measurement from 10 mA to 100 A with accessory current
sensor clamp
- Precision temperature indication in °C and °F for Pt100 / Pt1000 sensors
- Display illumination can be activated, analog display: linear or
logarithmic for insulation measurement
- Acoustic signal for: Continuity testing, dangerous contact voltages,
exceeded overload limits
- Min-Max value storage
- IP 54 housing, protective rubber cover as standard feature
- Windows software available as accessory for processing and graphic display
of measured values via RS 232 interface
- DKD calibration certificate
|
We at facebook
