METRAHIT 16I

discontinued - successor: METRAHIT ISO

Digital-Analog TRMS Multimeter with Insulation Measurement for Service Technicians

This inexpensive, universal multimeter has been especially designed to fulfill the requirements of electrical service technicians.
In addition to a multimeter, it also includes an insulation tester (500 V / 1000 V) per VDE 0413, and a precision temperature meter. The optional current transformer clamp WZ12A allows for trouble-free, safe measurement of current up to 30 A / 100 A.

Rugged digital multimeter ± 3100 digits, with analog display
Automatic blocking sockets - ABS
IR interface
V_DC, V_AC/DC, V_AC, Ohm, °C (Pt100/Pt1000)
Continuity and diode testing
Storage of MIN-MAX values to memory (data hold)
Minimal inherent deviation ± (0.25% + 1 digit for V_DC )
With cable set, protective rubber cover and DKD calibration certificate
CSA certification
DKD calibration certificate

or as set		Art.No.
METRA HIT 16I-Set 1	measurement case with insulation measuring instrument and multimeter plus cable set, battery, GH18 protective rubber cover with carrying strap, DKD calibration certificate and TF220 temperature sensor	M216E
METRA HIT 16I-Set 2	measurement case with insulation measuring instrument and multimeter plus cable set, battery, GH18 protective rubber cover with carrying strap, DKD calibration certificate, WZ12B current sensor clamp and TF220 temperature sensor	M216F

	Article No: M216B M216E M216F
	Technical Data » GB » F » PL (pdf 115 kB)
	Operating Instructions » GB » F » I » E » NL » CZ » SF » S » DK » PL (pdf 390 kB)
	Per safety standard IEC 61010-1 since 1/2004 (pdf 48 kB)
	Software METRAwin10/METRAHit
	Accessories (display)

1.	WZ11B	Current Sensor Clamp, 0.5 ..20 / ..200A_AC, adjustable
2.	Z3512A	Current Sensor Clamp 1/10/100/1000 A_AC, selectable
3.	Z13B	Current Transformer Clamp 0,5-60/600A_DC; 0,2-40/400A_AC, 10mV/A; 1mV/A, 1,5%; 2%, 50mm Ø
4.	Z3431-2	High Frequency Probe, 100kHz - 750MHz, 0.25..50V AC
5.	TF220	Pt 1000 Immersion Probe for Measurements in Gas and Liquid
6.	TF550	Pt 100 Immersion Probe for Measurements from -50°... +550°C
7.	TF400CAR	Pt 1000 dipstick oil temperature sensor for motor oil temperature measurement in automotive applications
8.	Z3409	Pt 100 Sensor for Surface and Immersion Measurements
9.	TS-Chipset	Pt 100 Temperature Sensors, adhesive, -50°.. +550°C
10.	Z3431-3	Temperature Probe with Immersion Sensor, NiCr-Ni, -20.. +350°C
11.	Z3431-9	Temperature Probe without Sensor, NiCr-Ni, -20.. +350°C
12.	Z3431-4	Temperature Probe without Sensor, NiCr-Ni, -25.. +1150°C
13.	BD232	Interface Adapter for METRAHit Multimeters - IR/RS232
14.	BD-Pack 1	Single-Channel Recording System for Multimeters with Integrated Memory: METRAHit 22M, 26M, 29S, 30M and 29C
15.	SI232-II	discontinued - Memory adapter
16.	Z3241	Interface cable RS232 for connecting PC - measuring instrument
17.	KS17-ONE	Cable Set, max. 16 A, 600 V / CAT III, Length 1.30 m
18.	KS17S	Cable set with 2 mm Ø steel tips and 120 cm cable, 1000 V / CAT II
19.	KS17-2	Cable Set, max. 16 A, 1000 V / CAT III, Length 1.30 m
20.	KY94	Hook Clips (1 Pair) for KS17-2
21.	KY95-1	Alligator Clips (1 Pair) for KS17-ONE
22.	F829	Carrying Pouch for METRAHit
23.	F836	Ever-ready Case for METRAHit with Cable Compartment
24.	F840	Ever-ready Case for 2 METRAHit, 2 Adapters + Accessories
25.	HC20	Hard Case for 1 METRAHit and Accessories
26.	HC30	Hard Case for 2 METRAHit and Accessories
27.	GH18	Protective Rubber Cover and Carrying Strap for METRAHit
28.	HitBag	Cordura Belt Pouch for METRAHIT and METRAport
29.	NW3A	Shunt resistor 3A, 0.1 Ω class 0,5 600V CAT.IV, 100mV/A
30.	NW300mA	Shunt resistor 300mA, 0.1Ω, class 0,5; 1mV/mA
31.	KY95-3	Alligator Clips (1 Pair) for KS17-2
32.	KS-NTS	Cable Set with Different Test Probes, max. 20 A, 1000 V CAT III
33.	METRAFLEX 3000	Flexible Current Sensor 30/300/3000 A, Loop length 610mm

METRAHIT 16I

discontinued - successor: METRAHIT ISO

Accessories (hide)

Catalogs T&M and Industry

Fairs and Product Shows

My Measuring Task

Video Streams

FAQs - FAQs - FAQs

Product Index