 |
Measuring transmitter with contactless, capacitive sensing system for acquiring the angular position of a shaft.
A load-indepent DC-signal with a range of 4 to 20 mA is read out from the measurement
output. The robust housing has made this unit ideal for machines, ship building, transport, construction of vehicles and in the chemical industry.
- Patented contactless capacitive system, wear-free
- Measuring range, direction of rotation, characteristics, output changeover
and other functions can be programmed via PC: facilitates planning and
project work, short lead times, minimal inventory
- Angle of rotation measuring range: 0°...10° to 0°...50° or 0°...50°
to 0°...350°
With gearbox 0...20° to 0...1555 revolutions
Measurement output (measuring/supply circuit) utilizes 2-wire connection (4
to 20 mA signal)
- Simulation of measured value allows to test subsequent control circuits,
control loops or measuring circuits during installation
- Display of present measurands and graphical representation on screen for
longer time periods
Adjustment of mechanical position and fine adjustment of the analog output,
zero point and span may be set independently
- Programmable output characteristics: linear, V-characteristic or freely
selectable linearization curve
- Shaft can be turned through full, no damage occurs even if the upper limit
value of the measuring range is exceeded
- Serial interface
- Permissible static load on the shaft: max. 1000 N (radial), max. 500 N
(axial)
- Surface mounting device in rugged housing (IP67): vibration and shock
resistant
|
We at facebook
